 |
 Equipment List |
|
|
- Agie Mondo Star 50 CNC EDM (Electrical Discharge Machine):
- Made in USA
- 60 amp peak capacity
- Maximum part size 27 x 36"
- Automatic 25 position electrode changer for full unattended operation
- Erowa Swiss-made interchangeable tooling system, .00008"(.002mm) accuracy and repeatability
- Offsite remote monitoring with real-time video images
- Agie Challenge 2 CNC Wire EDM (Electrical Discharge Machine):
- Made in Switzerland
- Maximum part size 29.5 x 21.6 x 9.8”
- 30 degree maximum cutting taper angle
- Wire sizes 0.004 to 0.013” with automatic threading
- Automatic drop tank
- Smallest Programmable step 0.000004"
- Offsite remote monitoring of operational status
- AgieDrill High Speed CNC Small Hole Drilling Machine (“Hole Popper”)
- Maximum part size 19.6 x 15.7 x 11.8”
- Hole diameters 0.010 to 0.120”
- X-, Y- and Z-axis CNC controlled.
- Cincinnati Arrow Series 2 VMC-1000 CNC High-Speed Vertical Machining
Center.
- New December 2001
- Made in the UK
- Travel 20 x 40”. 2,200 lb. table capacity
- 12,500 rpm with 30 hp. motor, ceramic bearings, and chilled
spindle.
- Feed rates of 1,416 inches per minute, 21 position tool
changer.
- Siemens control with Ethernet connection, positioning accuracy
±0.0001"
- Leadwell CNC Vertical Machining Center:
- 16 position automatic tool changer.
- Built in spindle oil chiller, spindle speeds up to 20,000
rpm.
- Fanuc control.
- (2) Sharp vertical milling machines with 0.0002" digital
readouts.
- Okamoto surface grinder, 6 x 14"
- Kent surface grinder, 8 x 16" with 0.0001" digital
readout
- Sharp engine lathe, 17 x 40"
- Inspection equipment:
- Erowa Electrode Presetting Station. Measures electrodes
and creates X, Y, Z, and C-axis offsets with digital readout,
printer, and microscope
- Micro-Vu optical comparator: 14” screen with Q16 Metrology
Computer and digital readout.
- Nikon optical comparator with 12” screen.
- Starrett 12" Digi-Chek height master gage with .0001"
micrometer head.
- Starrett surface plate
- Gage block sets, gage pins, .0001" test indicator,
etc.
- Rockwell hardness tester
- Gromax Deckel type cutter grinder
- Westhoff electrode drilling machine
- Roll-In vertical bandsaw
- Kalamazoo 7AD horizontal bandsaw
- Delta vertical bandsaw
- Torit dust collection system in grind room
- Torit dust collection system for CNC mill
- Design and programming equipment:
- Dell PC’s and server
- SolidWorks 2006
- Mastercam version X with solid modeling
- D-size plotter
- Integrity Mold is located in a clean, air-conditioned, 4,000
square foot facility 35 minutes Northwest of downtown Fort Worth,
Texas.
|
|
Copyright Integrity Mold, LP
2005 - 2010 |
Integrity Mold, LP • 3200 Curtis Drive, Suite 130, Fort Worth, TX 76116 • Tel: (817) 244-6677 • Fax:
(817) 244-6678 • data@integritymold.com |
|
|
|
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}